Root Intrusion Removal In Spokane, WA

Tree roots don’t need much of an opening to work their way into a sewer or drain line – a hairline crack or a loose joint is enough. Once inside, roots grow fast, and what starts as a small intrusion can turn into a full blockage or a collapsed section of pipe. Our root intrusion repair service clears the roots, repairs the damage, and helps prevent it from happening again. Call (509) 508-5574 if your drains are slowing down or backing up.

Signs of Root Intrusion

• Slow-draining sinks, tubs, or toilets that don’t clear with a plunger
• Gurgling sounds coming from drains
• Sewage odors near the yard or basement floor drain
• Recurring backups in the same drain line
• Unusually lush or fast-growing patches of grass over the sewer line

If you’ve noticed any of these, it’s worth having the line checked before roots cause a full collapse.

How We Find and Remove Root Intrusion

We start with a sewer camera inspection to see exactly where roots have entered the line and how much damage has been done. From there, we can typically clear the blockage with mechanical cutting or hydro jetting, which strips roots and buildup from the pipe walls without digging up the yard.

Repairing the Line After Removal

Clearing the roots is only half the job – if there’s a crack or open joint letting roots in, it needs to be sealed or the problem will come back. Depending on the damage, we may recommend CIPP pipe lining or sewer pipe lining to reinforce the pipe from the inside, or full trenchless pipe repair if a section is too damaged to line. For a root intrusion sewer line issue that’s already caused a collapse, a more targeted sewer line repair may be the right call.

Tree Root Removal in Pipes – What to Expect

If you’re dealing with tree root removal in pipes for the first time, the process usually looks like this: inspect, clear, then decide whether the pipe needs lining or replacement. Most homes with mature trees near the sewer line will see roots again eventually, so we’ll also flag which trees are the likely source so you know what to watch going forward.

Preventing Future Root Intrusion

• Scheduling a camera inspection every couple of years if you have large trees near the line
• Lining older clay or cast iron pipe, which is more prone to root entry than modern PVC
• Avoiding planting new trees directly over or near the sewer line
• Addressing slow drains early instead of waiting for a full backup

Frequently Asked Questions

Can I remove roots myself with a store-bought root killer?

Chemical treatments can slow regrowth but won’t clear an existing blockage or repair damaged pipe. A proper inspection and mechanical or hydro jetting removal gets the line fully clear.

Will I need to dig up my yard?

Not necessarily. Many root intrusion repairs can be handled with trenchless lining methods that avoid a full trench.

How do I know if roots are the cause of my backup?

A camera inspection is the most reliable way to confirm it – we can see the roots directly inside the line rather than guessing from symptoms alone.

How often does root intrusion come back?

It depends on the pipe material and how close the trees are. Lining the pipe significantly reduces the chance of regrowth compared to just cutting the roots out.

If your drains are slow, gurgling, or backing up repeatedly, don’t wait for a full blockage. Call Spokane Pipe Repair at (509) 508-5574 to get the line inspected and cleared.